• Grey
    Grey
  • Black
    Black
  • Green
  • Yellow
Details (click to enlarge)
Angels (click to enlarge)
Certificates
Components
Product Icons
  • I
  • II
  • 5 years
  • PWM
  • 1-10V
  • DALI
  • <20%
  • <12
  • -40ºC +85ºC
  • IP67
  • IP68
  • IK10
Product features

1. Connectable technology, ease of maintenance.
2. Cell technology of low cooling and high thermal conductivity. The structure allows fast chip cooling, high heat conduction efficiency and high thermal dissipation performance.
3. Led-by-pass technology: If a led is damaged, it will not affect the rest, nor will it increase its operating current.
4. Driver with intelligent technology of constant current, output of stable current, intelligent unit with numerous options, the light can be adjusted automatically by the system of regulation time.
5. Degree of protection of the optical block IP68 and IK10, high level of protection against water and impacts.
6. Constant flux emission system (CLO), uniform distribution of light over time.

Light distribution image (click to enlarge)
LIT1
LIT1
LIT13
LIT13
Product dimensions (click to enlarge)

(see product parameters table for details)
Product RangeOutdoor
Product FamilyATEX
Product ModelExplosion Proof Floodlight
Series ReferenceEXEP
Warranty5 years
Lifespan @ Ta=25ºCL70 ~ L85 F10 100.000 h
Lifespan @ Ta=40ºCL70 ~ L85 F10 60.000 h
Voltage (V)100-277VAC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.98
Power Efficiency (PE %)>90%
Flicker (%)0%
Total Harmonic Distorsion (THD %)<20%
Protection ClassI, II
System Luminous Efficacy (Lm/W)100-105 lm/W ±10%
Color Render Index (CRI >Ra)80
Correlated Color Temperature (CCT ºK)2200K~6000K
Color Consistency (SDCM)< 5
Unified Glare Rating (UGR)<12
Beam Angle (Degrees)Diferent options regarding lens type, 120°
Upper Light Output Ratio (ULOR %)0%
Explosion-ProofII 2G Ex eb mb IIA T4 Gb, III 2D Ex tb IIIC T(95ºC) Db
Optical Compartment Tightness (IP)IP68
Auxiliary Compartment Tightness (IP)IP67
Impact Resistance (IK)IK10
Surge ProtectionBasic 4kV, Extended 10kV
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionNTC Thermistor
BrandBridgelux
Type45mil
BrandMeanwell
Series TypeHLG
Internal or ExternalExternal
Isolated or NotIsolated
IPIP67
Lifespan @ Tc=60ºC100.000 h
Surge Protection4 kV, 10kV
Overload and Short Circuit ProtectionYes
Thermal Foldback ControlOptional
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Body MaterialAluminium alloy
FinishingAluminium
Color RALGrey, Black, Green, Yellow
Cover MaterialTempered glass
Cover TypeClear
Locking SystemStainless steel screws
Lens MaterialPC
Reflector MaterialAluminium
Diffuser MaterialTempered glass
Cable Material3 * 1.0mm rubber with cold-pressed terminal
Connectors SystemsWaterproof threaded quick connector
Waterproof ConnectorsYes
Tj Temperature (Tj ºC)<80ºC @ Ta=25ºC
Tc Temperature (Tc ºC)<60ºC @ Ta=25ºC
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)-40ºC +60ºC
Operating Humidity (%RH)5-95ºRH
Constant Light Output (CLO)Optional
Scheduled Dimming System6 levels steps, Optional
Dimming FunctionPWM, 1-10V, DALI (optional)
Other Sensors OptionsPhotoelectric, Movement, Other
Wired Communications CompatibilityYes
Wirless Communications CompatibilityYes
TypeFixing to surface
Fixing To Existing PoleNo
SystemU type bracket (R optional)
Vertical Angle AdjustmentYes
Mounting Height4-12M
Horizontal Angle AdjustmentYes
Replaceable Light SourceNo
Replaceable DriverYes
Replaceable LensYes
Replaceable CoverYes
Housing Opening SystemStainless steel screws
Wire Connectors SystemWaterproof quick Threaded fastener
instruction

1. Hold the U or R type bracket in the mounting position.
2. Mark the two positions of the screw with a pencil or other tools on the wall.
3. Drill in the designated area.

instruction

4. Install the U or R type bracket, tighten the screws.

5. Connect the three input cables of the luminaire and the power cables.
6. Adjust the fixing screw of the parts, place the luminaire with a suitable projection angle.

Matters need attention 1. Before use, should carefully read the instructions , to avoid accidents and damage.
2. Please wear gloves to avoid injury before installation work.
3. Lighting installation, and wiring work must be carried out in the absence of power.
4. Power line joints must do insulation , waterproofing treatment.
5. Do not look directly at the light emitting LED lighting in close distance, ensure not hurt the eyes.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXEP40W2413602502004.5
EXEP60W6013703702408.5
EXEP80W6013703702408.5
EXEP100W96146046024012.5
EXEP120W96146046024012.5
EXEP150W144146046024012.5
EXEP185W156146046024012.5
Product Builder (start building your product)
model
EXEP
power
40W
60W
80W
100W
120W
150W
185W
N Leds
144
156
24
60
96
color CCT
AMB2
2200K
AMB
1700K
CW
6000K
NW
4000K
PW
5000K
WW
3000K
voltage
120
100V-120V
240
200V-240V
305
176V-305V
lens
LIT13
Asymmetric distribution of 60º*30º
LIT1
Symmetric distribution of 120º
color ral
BK
Black
GRE
Green
GR
Grey
YE
Yellow
control
1-10V
Dimming 1-10V
CLO
Constant Light Output
DALI
Digital Addresable Lighting Interface
NC
No control
PT
Potenciometer
PWM
Pulse Width Modulation
Timer
Time Regulation System
Protection class
I
Type I
II
Type II
Optionals
EXPEC001
Photoelectric control sensor
INTEGRATED
PW·10KD05KWV
External surge protection device 10kv
INTEGRATED
Accessories
ReferenceNameDescription
EXEPMKUBWall U bracket for ATEX light
EXEPMKPBPivoting wall bracket for ATEX light
EXEPMKHBHook bracket for ATEX light
EXEPMKRBRecessed kit for ATEX light
Product Parameters
ReferenceSystem PowerNº LEDSCurrent (mA)System Efficacy (Lm/W)Luminous Flux (Lm)Lumen maintenance @ Ta=25ºCTj @ Ta=25ºCDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXEP40W24500mA100 lm/W ±10%3808405242084364L70 F10 100.000h<78ºC200*200*270mm4,3
EXEP60W60300mA105 lm/W ±10%5998638266286873L85 F10 100.000h<59ºC300*300*175mm8,4
EXEP80W60400mA100 lm/W ±10%7616810484168728L75 F10 100.000h<65ºC300*300*175mm8,4
EXEP100W96300mA100 lm/W ±10%9520101301052010910L85 F10 100.000h<59ºC400*400*185mm12,3
EXEP120W96350mA100 lm/W ±10%11424121561262413092L80 F10 100.000h<62ºC400*400*185mm12,3
EXEP150W144300mA105 lm/W ±10%14994159551656917183L85 F10 100.000h<59ºC400*400*185mm12,3
EXEP185W156350mA100 lm/W ±10%17612187411946220184L80 F10 100.000h<62ºC400*400*185mm12,3

C/ Ventalomar 1, 45007,
Toledo Spain
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Mall Toma Real, Carrera 9 #10 07, Local 24,
Neiva city - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

9th Floor, Amtel Building,148 Des Voeux Road Central –
Republic of China - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX born under the idea of being a world leader in the design and manufacture of LED lighting products with high quality and reliability.

ENARLUX performs strict auditing processes and manufacturing control, as well as a comprehensive selection of components that ensure a finished product of high durability and high performance.