• White
    White
  • Silver
Details (click to enlarge)
Angels (click to enlarge)
Certificates
Components
Product Icons
  • I
  • 3-5 years
  • PWM
  • 1-10V
  • DALI
  • <15%
  • <19, <17
  • <19
  • <17
  • -40ºC +85ºC
Product features

  1. Complete luminaire for recessed installation.
  2. Its translucent cover creates a perfectly homogenous visual effect.
  3. The aluminum structure allows fast cooling of the chip, a great efficiency in the conduction of heat and a great performance in the thermal dissipation.
  4. Led-by-pass technology: If a led is damaged, it will not affect the rest, nor will it increase its operating current.
  5. External driver with innovative Plug-and-Play connector
  6. Additional protection to protect the LEDs from being hit by LGP.

Light distribution image (click to enlarge)
LID1
LID1
LID2
LID2
Product dimensions (click to enlarge)

(see product parameters table for details)
Product RangeIndoor
Product FamilyIndoor lighting
Product ModelPanel
Series ReferenceEXPA
Warranty3-5 years
Lifespan @ Ta=25ºCL80 F10 60.000 h
Lifespan @ Ta=40ºCL80 F10 40.000 h
Voltage (V)100-240VAC, 200-240VAC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.9
Flicker (%)0%
Total Harmonic Distorsion (THD %)<15%
Protection ClassI
System Luminous Efficacy (Lm/W)100-130 lm/W ±10%
Color Render Index (CRI >Ra)80
Correlated Color Temperature (CCT ºK)3000K~6000K
Color Consistency (SDCM)<5, <3 (Pro+ Master UGR)
Unified Glare Rating (UGR)<19, <17
Beam Angle (Degrees)110º
Index of protection (IP):IP20, IP54 (optional)
Surge ProtectionNo
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionYes
BrandEpistar
TypeSMD
Model2835
BrandXz-Power, Philips, Tridonic, Lifud, Boke (optionals)
Internal or ExternalExternal
Isolated or NotIsolated
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Back CoverZinc-coated steel, White lacquered aluminum (Model EXPAAU)
Body MaterialExtruded aluminum
FinishingAluminum with powder coating
Color RALWhite, Silver
Cover MaterialPS
Cover TypeTranslucent
Locking SystemStainless steel screws
Light Guide Plate MaterialPMMA
Reflector MaterialReflective paper
Diffuser MaterialPS
Cable Material2*1.0mm
Connectors SystemsThreaded fastener
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)-40ºC +60ºC
Operating Humidity (%RH)5-95ºRH
Dimming FunctionPWM, 1-10V, DALI (optional)
Other Sensors OptionsPhotoelectric, Movement, Other
Wired Communications CompatibilityYes
Wirless Communications CompatibilityYes
TypeBuilt-in, Hanging or surface
SystemSupported, hanging kit, surface kit, built-in kit (optional)
Vertical Angle AdjustmentNo
Horizontal Angle AdjustmentNo
Replaceable Light SourceNo
Replaceable DriverYes
Replaceable LensNo
Replaceable CoverNo
Housing Opening SystemStainless Steel Screws
Wire Connectors SystemThreaded fastener
instruction

Method 1. Built-in ceiling:
1. In recordable roof: remove armstrong panel or luminaire installed in the false ceiling. In plaster ceiling: make the corresponding cut and install the kit to embed panels.
2. Insert the panel into the open hole.

instruction

3. Connect the power cable.
4. Let the panel rest on the profiles of the recordable ceiling or use the kit of recessed panels in the ceiling of plaster.

instruction

Method 2. Surface mounting:
1. Mark the fixing holes according to the dimension of the product as shown in this manual. Then place the expansion sleeve in the fixing holes, screw the expansion bolt and stay at 5 mm.

instruction

2. Assemble 4 sides (A and B) of the frame as shown in the image.

instruction

3. Place the 4pcs screws in the larger fixing holes in the frame. Move the frame forward / backward and tighten the screws. Pull one side of the frame.

instruction

4. Insert the LED panel (B) into the device. Pay attention to place the LED panel (B) and the support (A) in order as shown in the cross section view. Insert the other side B into the accessory as in step 3 to complete the installation.

instruction

Method 3. Suspension installation:
1. Necessary accessories.

instruction

2. Fix the hanging cables on the ceiling in order with the expansion bolts.

instruction

3. Fix the other two ends of the hanging cables to the panel light with PWB3X6, adjusting the proper distance between the two ends to ensure that the panel light is located at a horizontal security level.

instruction

4. Adjust the length of stainless wire to the suitable height.

Matters need attention 1. Before use, should carefully read the instructions , to avoid accidents and damage.
2. Please wear gloves to avoid injury before installation work.
3. Lighting installation, and wiring work must be carried out in the absence of power.
4. Power line joints must do insulation , waterproofing treatment.
5. Do not look directly at the light emitting LED lighting in close distance, ensure not hurt the eyes.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXPA36W600*600665027065020
EXPA36W620*620665027067523
EXPA36W1200*3006129527034821
EXPA60W1200*6003129527067522
EXPAA30W600*600665027065020
EXPAA36W600*600665027065020
EXPAA36W620*620665027067523
EXPAA36W1200*3006129527034821
EXPAA60W1200*6003129527067522
EXPAAU25W600*600665027065020
EXPAAU30W600*600665027065020
EXPAAU36W600*600665027065020
EXPAAU36W620*620665027067523
EXPAAU36W1200*3006129527034821
Product Builder (start building your product)
model
EXPAA
EXPAAU
EXPA
power
25W
30W
36W
60W
color CCT
CW
6000K
NW
4000K
PW
5000K
WW
3000K
voltage
120
100V-120V
240
200V-240V
305
176V-305V
IP
IP20
IP54
dimensions
600*600
595*595*11mm
620*620
620*620*10mm
1200*300
1195*295*11mm
1200*600
1195*595*11mm
lens
LID1
Symmetric distribution of 120º
LID2
Symmetric distribution of 110º
color ral
SL
Silver
WH
White
control
1-10V
Dimming 1-10V
DALI
Digital Addresable Lighting Interface
NC
No control
PWM
Pulse Width Modulation
Accessories
ReferenceNameDescription
EXPAEMP60Recessed kit Panel Light ENARLUX 600*600
EXPAEMP120Recessed kit Panel Light ENARLUX 1200*300/600
EXPASUS60Suspended panel kit 600*600
EXPASUS120Suspended panel kit 1200*300/600
EXPEW600*600Surface Kit Panel 600*600
EXPEW1200*300Surface Kit Panel 1200*300
EXPEW1200*600Surface Kit Panel 1200*600
EXPANDD40WDimmable Driver 40w
EXPANDD50WDimmable Driver 50w
EXPANDD60WDimmable Driver 60w
EXDIRC800WDimmer with remote control
EXPEC001400WPhotocell daylight sensor dimmer
EXMCWS16X12800WInteligent microwave sensor 16x12m
Product Parameters
ReferenceSystem PowerVoltageUGRSystem Efficacy (Lm/W)Luminous Flux (Lm)Lumen maintenance @ Ta=25ºCWarrantyDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXPA36W200-240VAC<19100 lm/W ±10%3427364737873928L80 F10 60.000h3 years595*595*11mm3,1
EXPA36W200-240VAC<19100 lm/W ±10%3427364737873928L80 F10 60.000h3 years620*620*10mm3,7
EXPA36W200-240VAC<19100 lm/W ±10%3427364737873928L80 F10 60.000h3 years1195*295*11mm3,5
EXPA60W200-240VAC<19100 lm/W ±10%5712547056815891L80 F10 60.000h3 years1195*595*11mm7,6
EXPAA30W200-240VAC<19120 lm/W ±10%3427364737873928L80 F10 60.000h5 years595*595*11mm6
EXPAA36W200-240VAC<19120 lm/W ±10%4113437645454713L80 F10 60.000h5 years595*595*11mm3,1
EXPAA36W200-240VAC<19120 lm/W ±10%4113437645454713L80 F10 60.000h5 years620*620*10mm3,7
EXPAA36W200-240VAC<19120 lm/W ±10%4113437645454713L80 F10 60.000h5 years1195*295*11mm3,7
EXPAA60W200-240VAC<19120 lm/W ±10%6854729475747855L80 F10 60.000h5 years1195*595*11mm7,6
EXPAAU25W100-240VAC<17130 lm/W ±10%3094329234193546L80 F10 60.000h5 years595*595*11mm3,1
EXPAAU30W100-240VAC<17130 lm/W ±10%3713395141034255L80 F10 60.000h5 years595*595*11mm3,1
EXPAAU36W100-240VAC<17130 lm/W ±10%4455474149235106L80 F10 60.000h5 years595*595*11mm3,1
EXPAAU36W100-240VAC<17130 lm/W ±10%4455474149235106L80 F10 60.000h5 years620*620*10mm3,7
EXPAAU36W100-240VAC<17130 lm/W ±10%4455474149235106L80 F10 60.000h5 years1195*295*11mm7,6

C/ Ventalomar 1, 45007,
Toledo Spain
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Mall Toma Real, Carrera 9 #10 07, Local 24,
Neiva city - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

9th Floor, Amtel Building,148 Des Voeux Road Central –
Republic of China - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX born under the idea of being a world leader in the design and manufacture of LED lighting products with high quality and reliability.

ENARLUX performs strict auditing processes and manufacturing control, as well as a comprehensive selection of components that ensure a finished product of high durability and high performance.