• Black
    Black
  • Silver
  • Blue and white
Details (click to enlarge)
Angels (click to enlarge)
Certificates
Components
Product Icons
  • I
  • II
  • 5 years
  • 0-10V
  • PWM
  • DALI
  • <20%
  • <12
  • -40ºC +85ºC
  • IP67
  • IP68
  • IK10
Product features

1. Modularization pluggable technology, free on-site maintenance tools.
2. Low cellular cooling technology and high thermal conductivity, the whole structure of the cooling chip, efficiency heat conduction and heat dissipation performance.
3. Low single star LED light damage does not affect the other light source current.
4. Intelligent constant current drive technology, output stability, break through the life of power, can be automatically adjusted light.
5. Optical compartment IP68 and IK10 protection, the highest level of protection against water and impacts.
6. Constant Light Output (CLO), uniform distribution of light over time.
7. 
Modular series, full power solutions. 

Light distribution image (click to enlarge)
LST9
LST9
LST10
LST10
LST11
LST11
LST12
LST12
LST13
LST13
Product dimensions (click to enlarge)

(see product parameters table for details)
Product RangeStreet lighting
Product FamilyStreet Light
Product ModelModular Street Light IP68 PRO
Series ReferenceEXMSL
Warranty5 years
Lifespan @ Ta=25ºCL70 ~ L90 F10 100.000 h
Lifespan @ Ta=40ºCL70 ~ L90 F10 60.000 h
Voltage (V)90-305V AC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.95
Power Efficiency (PE %)>90%
Flicker (%)0%
Total Harmonic Distorsion (THD %)<20%
Protection ClassI, II
System Luminous Efficacy (Lm/W)110-130 lm/W ±10%
Color Render Index (CRI >Ra)80
Correlated Color Temperature (CCT ºK)2200K~6000K
Color Consistency (SDCM)< 5
Unified Glare Rating (UGR)<12
Beam Angle (Degrees)Diferent options regarding lens type
Upper Light Output Ratio (ULOR %)0%
Optical Compartment Tightness (IP)IP68
Auxiliary Compartment Tightness (IP)IP67
Impact Resistance (IK)IK10
Surge ProtectionBasic 4kV, Extended 10kV
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionNTC Thermistor
BrandCREE
TypeXT-E
ModelR5
Max. Luminous Efficacy (Lm/W)148 Lm/W
BrandInventronics
Series TypeEUC, EBD, Other series optional
Internal or ExternalExternal
Isolated or NotIsolated
IPIP67
Lifespan @ Tc=60ºC100.000 h
Surge Protection4 kV, 10kV
Overload and Short Circuit ProtectionYes
Thermal Foldback ControlOptional
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Body MaterialAluminium fundition
FinishingAluminium
Color RALBlack, Silver, Blue and white
Cover MaterialPC, Lens
Cover TypeClear
Locking SystemStainless steel screws
Lens MaterialPC
Cable Material3*1.0mm rubber with cold-pressed terminal
Connectors SystemsWaterproof threaded fastener connector
Waterproof ConnectorsYes
Tj Temperature (Tj ºC)<80ºC @ Ta=25ºC
Tc Temperature (Tc ºC)<60ºC @ Ta=25ºC
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)-40ºC +60ºC
Operating Humidity (%RH)5-95ºRH
Constant Light Output (CLO)Optional
Scheduled Dimming System6 levels steps, Optional
Dimming Function0-10V, PWM, DALI (optional)
Other Sensors OptionsPhotoelectric, Movement, Other
Wired Communications CompatibilityYes
Wirless Communications CompatibilityYes
TypeSide fitting. Top fitting need an optional accesory
Fixing To Existing PoleYes
SystemFixing 59mm diameter curve arm pole
Vertical Angle AdjustmentYes with optional accesory
Mounting Height6-12M
Horizontal Angle AdjustmentYes
Replaceable Light SourceYes
Replaceable DriverYes
Replaceable LensYes
Replaceable CoverYes
Housing Opening SystemStainless steel screws
Wire Connectors SystemThreaded fastener
instruction

Step1. Loosen the cap, move away the tail cover.
Step2. Loosen the fixing piece.

instruction

Step3. Fixed lamp pole,then fasten the screws.
Step4. Connect the three wires of lamp input and the wires of lamp pole.

instruction

Step5. Press the tail cover, then fasten the screws.

instruction

1. Adjusting the lamp direction before locking screws.
2. Pole screws must be locked, to prevent loss or rotation.
3. The bare wires should be insulated to prevent short circuits.
4. Green line must be grounded to prevent leakage accidents.

Matters need attention 1. Before use, should carefully read the instructions , to avoid accidents and damage.
2. Please wear gloves to avoid injury before installation work.
3. Lighting installation, and wiring work must be carried out in the absence of power.
4. Power line joints must do insulation , waterproofing treatment.
5. Do not look directly at the light emitting LED lighting in close distance, ensure not hurt the eyes.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXMSL20W16003201604,3
EXMSL30W16003201604,3
EXMSL40W16003201604,3
EXMSL50W16003201604,3
EXMSL60W16003201604,3
EXMSL40WX216003201605,3
EXMSL60WX216003201605,3
EXMSL80WX216003201605,3
EXMSL100WX216003201605,3
EXMSL120WX216003201605,3
    $name$
    $name$
Product Builder (start building your product)
model
EXMSL
power
20W
30W
40W
50W
60W
80W
100W
120W
Modules (number of leds )
X1
(1module)
(18 Leds)
X2
(2 modules)
(36 LEDS)
color CCT
AMB2
2200K
AMB
1700K
CW
6000K
NW
4000K
PW
5000K
WW
3000K
voltage
120
100V-120V
240
200V-240V
305
176V-305V
UNVH
249V-528V
UNV
90V-305V
lens
LST10
Asymmetric distribution 10
LST11
Asymmetric distribution 11
LST12
Symmetric distribution 12
LST13
Symmetric distribution 13
LST9
Asymmetric distribution 9
color ral
BK
Black
GR
Grey
WB
White and Blue
control
0-10V
Dimming 0-10V
CLO
Constant Light Output
CTLEBD
0-5V/0-10V/PWM/Timer
CTLESD-EUD
0-10V/PWM/Timer
DALI
Digital Addresable Lighting Interface
DMX512
Control of lighting and effects of the stage
NC
No control
PWM
Pulse Width Modulation
Timer
Time Regulation System
TRIAC
Triode for Alternating Current
Protection class
I
Type I
II
Type II
Optionals
EXPEC001
Photoelectric control sensor
INTEGRATED
PW·10KD05KWV
External surge protection device 10kv
INTEGRATED
PW·20K
External surge protection device  20kV
INTEGRATED
Product Parameters
ReferenceSystem PowerNº LEDSCurrent (mA)System Efficacy (Lm/W)Luminous Flux (Lm)Lumen maintenance @ Ta=25ºCTj @ Ta=25ºCDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXMSL20W18350mA130 lm/W ±10%2475263427352837L90 F10 100.000h<51ºC520*240*80mm3,5
EXMSL30W18500mA125 lm/W ±10%3570379939454091L85 F10 100.000h<57ºC520*240*80mm3,5
EXMSL40W18700mA120 lm/W ±10%4570486250505237L80 F10 100.000h<65ºC520*240*80mm3,5
EXMSL50W18860mA115 lm/W ±10%5474582560496273L75 F10 100.000h<72ºC520*240*80mm3,5
EXMSL60W181000mA110 lm/W ±10%6283668669437201L70 F10 100.000h<80ºC520*240*80mm3,5
EXMSL40W36350mA130 lm/W ±10%4950526854705673L90 F10 100.000h<51ºC520*240*80mm4,5
EXMSL60W36500mA125 lm/W ±10%7140759878908183L85 F10 100.000h<57ºC520*240*80mm4,5
EXMSL80W36700mA120 lm/W ±10%913997251009910474L80 F10 100.000h<65ºC520*240*80mm4,5
EXMSL100W36860mA115 lm/W ±10%10948116501209812547L75 F10 100.000h<72ºC520*240*80mm4,5
EXMSL120W361000mA110 lm/W ±10%12566133721388614401L70 F10 100.000h<80ºC520*240*80mm4,5

C/ Ventalomar 1, 45007,
Toledo Spain
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Mall Toma Real, Carrera 9 #10 07, Local 24,
Neiva city - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

9th Floor, Amtel Building,148 Des Voeux Road Central –
Republic of China - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX born under the idea of being a world leader in the design and manufacture of LED lighting products with high quality and reliability.

ENARLUX performs strict auditing processes and manufacturing control, as well as a comprehensive selection of components that ensure a finished product of high durability and high performance.