• Black
    Black
Angels (click to enlarge)
Certificates
Components
Product Icons
  • I
  • 3 years
  • No
  • <20%
  • <12
  • -40ºC +85ºC
Product features

1. Waterproof floodlight for surface installation, replacing traditional luminaire.
2. Its aluminum reflector creates a perfectly homogenous visual effect that can not be differentiated from traditional halogen.
3. The aluminum structure allows fast cooling of the chip, a great efficiency in the conduction of heat and a great performance in the thermal dissipation.
4. Led-by-pass technology: If a led is damaged, it will not affect the rest, nor will it increase its operating current.
5. Internal driver with intelligent constant current technology, stable current output.

Light distribution image (click to enlarge)
LPR1
LPR1
Product dimensions (click to enlarge)

(see product parameters table for details)
Product RangeOutdoor
Product FamilyProjection Lighting
Product ModelFlood Light HP Slim II
Series ReferenceEXFLIP65HPSII
Warranty3 years
Lifespan @ Ta=25ºCL80 F10 60.000 h
Lifespan @ Ta=40ºCL80 F10 40.000 h
Voltage (V)220-240 AC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.9
Flicker (%)<10%
Total Harmonic Distorsion (THD %)<20%
Protection ClassI
System Luminous Efficacy (Lm/W)120 lm/W ±10%
Color Render Index (CRI >Ra)>70
Correlated Color Temperature (CCT ºK)4000K~5000K
Color Consistency (SDCM)< 6
Unified Glare Rating (UGR)<12
Beam Angle (Degrees)120°
Index of protection (IP):IP65
Surge ProtectionOptional
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionYes
BrandSEOUL SEMICONDUCTOR
TypeSMD
BrandLifud
Internal or ExternalInternal
Isolated or NotIsolated
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Body MaterialExtruded aluminum
FinishingAluminum with powder coating
Color RALBlack
Cover MaterialTempered safety glass
Cover TypeClear
Locking SystemStainless steel screws
Lens MaterialPC
Diffuser MaterialTempered safety glass
Cable Material3 * 1.0mm rubber with cold-pressed terminal
Connectors SystemsWaterproof threaded quick connector
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)-30ºC +45ºC
Operating Humidity (%RH)5-95ºRH
Dimming FunctionNo
Other Sensors OptionsNo
Wired Communications CompatibilityOptional
Wirless Communications CompatibilityOptional
TypeFixing to surface
SystemFixing U bracket to ceiling or wall
Vertical Angle AdjustmentYes
Horizontal Angle AdjustmentNo
Replaceable Light SourceNo
Replaceable DriverYes
Replaceable LensNo
Replaceable CoverNo
Housing Opening SystemStainless steel screws
Wire Connectors SystemWaterproof quick Threaded fastener

Step 1. Secure the bracket with the expansion screw.

Step 2. Adjust the luminaire with the proper angle.

Step 3. Make the connection to the power.

Matters need attention 1. Please, before use, carefully read the instructions to avoid accidents and dyears.
2. Please wear gloves to avoid possible injuries during installation work.
3. The installation of the luminaire and the wiring work must be done without electric current.
4. Electrical connections must be insulated and a waterproof treatment must be carried out.
5. Please, so as not to damage your eyes, do not look directly at the light that the luminaire emits at close range.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXFLIP65HPSII100W469037560015.5
EXFLIP65HPSII150W477042563020
EXFLIP65HPSII200W287042563012.5
Product Builder (start building your product)
model
EXFLIP65HPSII
power
100W
150W
200W
color CCT
CW
6000K
NW
4000K
voltage
120
100V-120V
240
200V-240V
lens
LPR1
Symmetric distribution of 120º
Optionals
EXPEC001
Photoelectric control sensor
INTEGRATED
PW·10KD05KWV
External surge protection device 10kv
INTEGRATED
PW·20K
External surge protection device  20kV
INTEGRATED
Product Parameters
ReferenceSystem PowerNº LEDSSystem Efficacy (Lm/W)Luminous Flux (Lm)Lumen maintenance @ Ta=25ºCDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXFLIP65HPSII100W100120 lm/W ±10%11424121561262413092L80 F10 60.000h230*276*55mm4.6
EXFLIP65HPSII150W150120 lm/W ±10%17136182341893619638L80 F10 60.000h250*311*55mm5.2
EXFLIP65HPSII200W200120 lm/W ±10%22848243122524826184L80 F10 60.000h300*361*55mm6.8

C/ Ventalomar 1, 45007,
Toledo Spain
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Mall Toma Real, Carrera 9 #10 07, Local 24,
Neiva city - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

9th Floor, Amtel Building,148 Des Voeux Road Central –
Republic of China - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX born under the idea of being a world leader in the design and manufacture of LED lighting products with high quality and reliability.

ENARLUX performs strict auditing processes and manufacturing control, as well as a comprehensive selection of components that ensure a finished product of high durability and high performance.