• White
    White
  • Silver
Detalles (Click para agrandar)
Ángeles (Click para agrandar)
Certificates
Components
Iconos del producto
  • I
  • 3 years
  • PWM
  • 1-10V
  • DALI
  • <15%
  • <22
  • -40ºC +85ºC
Product features

1. Special luminaire for clean rooms, wet rooms and other outdoor applications.
2. Its translucent cover creates a perfectly homogeneous visual effect.
3. The aluminum structure allows a fast cooling of the chip, a great efficiency in the conduction of heat and a great performance in the thermal dissipation.
4. Led-by-pass technology: If a led is damaged, it will not affect the rest, nor will it increase its operating current.
5. External driver with innovative Plug-and-Play connector.
6. Additional protection to protect the LED from being hit by LGP.

Light distribution image (Click para agrandar)
LID2
LID2
Product dimensions (Click para agrandar)

(ver la tabla de parámetros del producto para más detalles)
Gama de productoIndoor
Familia de productoIndoor lighting
Modelo del ProductoPanel IP65
Series ReferenceEXPAIP65
Warranty3 years
Lifespan @ Ta=25ºCL80 F10 60.000 h
Lifespan @ Ta=40ºCL80 F10 40.000 h
Voltage (V)100-240VAC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.9
Flicker (%)0%
Total Harmonic Distorsion (THD %)<15%
Protection ClassI
System Luminous Efficacy (Lm/W)100 lm/W ±10%
Color Render Index (CRI >Ra)80
Correlated Color Temperature (CCT ºK)3000K-6000K
Color Consistency (SDCM)< 6
Unified Glare Rating (UGR)<22
Beam Angle (Degrees)110º
Index of protection (IP):IP65
Surge ProtectionNo
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionYes
BrandEpistar
TypeSMD
Model2835
BrandXz-Power
Internal or ExternalExternal
Isolated or NotIsolated
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Back CoverWhite lacquered aluminum
Body MaterialExtruded aluminum
FinishingAluminum with powder coating
Color RALWhite, Silver
Cover MaterialPS
Cover TypeTranslucent
Locking SystemStainless steel screws
Light Guide Plate MaterialPMMA
Reflector MaterialReflective paper
Diffuser MaterialPS
Cable Material2*1.0mm
Connectors SystemsWaterproof connector
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)0ºC+40ºC
Operating Humidity (%RH)5-95ºRH
Dimming FunctionPWM, 1-10V, DALI (optional)
Other Sensors OptionsPhotoelectric, Movement, Other
Wired Communications CompatibilityYes
Wirless Communications CompatibilityYes
TypeBuilt-in, Hanging or surface
SystemSupported, hanging kit, surface kit, built-in kit (optional)
Vertical Angle AdjustmentNo
Horizontal Angle AdjustmentNo
Replaceable Light SourceNo
Replaceable DriverYes
Replaceable LensNo
Replaceable CoverNo
Housing Opening SystemStainless Steel Screws
Wire Connectors SystemWaterproof threaded fastener connector
instruction

Method 1. Built-in ceiling:
1. In recordable roof: remove armstrong panel or luminaire installed in the false ceiling. In plaster ceiling: make the corresponding cut and install the kit to embed panels.
2. Insert the panel into the open hole.

instruction

3. Connect the power cable.
4. Let the panel rest on the profiles of the recordable ceiling or use the kit of recessed panels in the ceiling of plaster.

instruction

Method 2. Surface mounting:
1. Mark the fixing holes according to the dimension of the product as shown in this manual. Then place the expansion sleeve in the fixing holes, screw the expansion bolt and stay at 5 mm.                                                                             
4. Adjust the length of stainless wire to the suitable height.

instruction

2. Assemble 4 sides (A and B) of the frame as shown in the image.

instruction

3. Place the 4pcs screws in the larger fixing holes in the frame. Move the frame forward / backward and tighten the screws. Pull one side of the frame.

instruction

4. Insert the LED panel (B) into the device. Pay attention to place the LED panel (B) and the support (A) in order as shown in the cross section view. Insert the other side B into the accessory as in step 3 to complete the installation.

instruction

Method 3. Suspension installation:
1. Necessary accessories.

instruction

2. Fix the hanging cables on the ceiling in order with the expansion bolts.

instruction

3. Fix the other two ends of the hanging cables to the panel light with PWB3X6, adjusting the proper distance between the two ends to ensure that the panel light is located at a horizontal security level.

instruction

4. Adjust the length of stainless wire to the suitable height.

Matters need attention 1. Before use, should carefully read the instructions , to avoid accidents and damage.
2. Please wear gloves to avoid injury before installation work.
3. Lighting installation, and wiring work must be carried out in the absence of power.
4. Power line joints must do insulation , waterproofing treatment.
5. Do not look directly at the light emitting LED lighting in close distance, ensure not hurt the eyes.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXPAIP6518W300*300635027035011
EXPAIP6522W600*300665027035011
EXPAIP6536W600*600665027065020
EXPAIP6536W620*620667027067520
    $name$
    $name$
Constructor de productos (comienza a construir tu producto)
model
EXPAIP65
power
18W
22W
36W
color CCT
CW
6000K
NW
4000K
PW
5000K
WW
3000K
voltage
120
100V-120V
240
200V-240V
305
176V-305V
dimensions
300*300
295*295*15mm
600*300
595*295*15mm
600*600
595*595*15mm
620*620
619*619*15mm
lens
LID2
Symmetric distribution of 110º
color ral
SL
Silver
WH
White
control
1-10V
Dimming 1-10V
DALI
Digital Addresable Lighting Interface
NC
No control
PWM
Pulse Width Modulation
Accessories
ReferenceNameDescription
EXPAEMP60Recessed kit Panel Light ENARLUX 600*600
EXPAEMP120Recessed kit Panel Light ENARLUX 1200*300/600
EXPASUS60Suspended panel kit 600*600
EXPASUS120Suspended panel kit 1200*300/600
EXPEW600*600Surface Kit Panel 600*600
EXPEW1200*300Surface Kit Panel 1200*300
EXPEW1200*600Surface Kit Panel 1200*600
EXPANDD40WDimmable Driver 40w
EXPANDD50WDimmable Driver 50w
EXPANDD60WDimmable Driver 60w
EXDACV4Z200WDALI dimming converter
EXDIRC800WDimmer with remote control
EXPEC001400WPhotocell daylight sensor dimmer
EXMCWS16X12800WInteligent microwave sensor 16x12m
Product Parameters
ReferenceSystem PowerSystem Efficacy (Lm/W)Flujo Luminoso (lm)Lumen maintenance @ Ta=25ºCDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXPAIP6518W100 lm/W ±10%1714182318941964L80 F10 60.000h295*295*15mm1.56
EXPAIP6522W100 lm/W ±10%2094222923142400L80 F10 60.000h595*295*15mm1.56
EXPAIP6536W100 lm/W ±10%3427364737873928L80 F10 60.000h595*595*15mm3.13
EXPAIP6536W100 lm/W ±10%3427364737873928L80 F10 60.000h620*620*15mm3.23

C/ Ventalomar 1, 45007,
Toledo España
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Centro Comercial Toma Real, Carrera 9 #10 07, Local 24,
Ciudad Neiva - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

Piso 9, Amtel Building, 148 Des Voeux Road Central,
República de china - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX nace bajo la idea de ser un referente mundial en el diseño y fabricación de productos de iluminación LED de alta calidad y fiabilidad.

ENARLUX realiza estrictos procesos de auditoría y control de fabricación, así como, una exhaustiva selección de componentes que garantizan un producto terminado de gran durabilidad y altas prestaciones.