• Black
    Black
Details (click to enlarge)
Angels (click to enlarge)
Certificates
Components
Product Icons
  • I
  • II
  • 5 years
  • PWM
  • 1-10V
  • DALI
  • <20%
  • <22
  • -40ºC +85ºC
Product features

1. Complete watertight industrial type luminaire for installation in suspension.
2. Specially designed for lighting corridors of industrial warehouses.
3. The internal aluminum structure allows a fast cooling of the chip, a great efficiency in the conduction of heat and a great performance in the thermal dissipation.
4. Led-by-pass technology: If a led is damaged, it will not affect the rest, nor will it increase its operating current.
5. Internal driver with intelligent constant current technology, stable current output.

Light distribution image (click to enlarge)
LIT6
LIT6
LIT9
LIT9
LIT11
LIT11
LIT12
LIT12
Product dimensions (click to enlarge)

(see product parameters table for details)
Product RangeOutdoor
Product FamilyIndustrial Lighting
Product ModelIndustrial Linear Light
Series ReferenceEXLL
Warranty5 years
Lifespan @ Ta=25ºCL80 F10 60.000 h
Lifespan @ Ta=40ºCL70 F10 50.000 h
Voltage (V)220-240 AC
Frecuency (Hz)50-60 Hz
Power Factor (PF)>0.95
Flicker (%)0%
Total Harmonic Distorsion (THD %)<20%
Protection ClassI, II
System Luminous Efficacy (Lm/W)140 lm/W ±10%
Color Render Index (CRI >Ra)>80
Correlated Color Temperature (CCT ºK)1700K~6500K
Color Consistency (SDCM)< 5
Unified Glare Rating (UGR)<22
Beam Angle (Degrees)Symmetrical, Asymmetrical
Index of protection (IP):IP66
Surge ProtectionOptional
PCB TypeMC-PCB
PCB MaterialAluminium
Thermal ViasYes
Led Bypass ProtectionYes
Overheating ProtectionYes
BrandPHILIPS
TypeSMD
Model3030
BrandPhillips
Series TypeXitanium
Internal or ExternalInternal
Isolated or NotIsolated
Thermal Interface Material (TIM)Yes
Body MaterialAluminium
Fins MaterialAluminium
Extra Cooling SystemThe whole structure of radiation
Body MaterialExtrusion of aluminum
FinishingAluminium
Color RALBlack
Cover MaterialPC, Lens
Cover TypeClear
Locking SystemStainless steel screws
Lens MaterialPC
Diffuser MaterialPC
Cable Material3 *1.0mm rubber with the cold-pressed terminal
Connectors SystemsWaterproof threaded fastener connector
Storage Temperature (ºC)-40ºC +85ºC
Operating Temperature (ºC)-30ºC +50ºC
Operating Humidity (%RH)5-95ºRH
Dimming FunctionPWM, 1-10V, DALI (optional)
Other Sensors OptionsPhotoelectric, Movement, Other
Wired Communications CompatibilityYes
Wirless Communications CompatibilityYes
TypeSurface
SystemAttached or hung by chains
Vertical Angle AdjustmentNo
Horizontal Angle AdjustmentNo
Replaceable Light SourceYes
Replaceable DriverYes
Replaceable LensYes
Replaceable CoverYes
Housing Opening SystemStainless Steel Screws
Wire Connectors SystemWaterproof housing
instruction

Required accesories

instruction

Step 2a. (Suspended installation) Mount the brooch, the rings and the hoist rope successively in the high compartment and then hang the other end of the lifting rope in the correct place, as in the image.

instruction

Step 2b. (Surface installation) Mark the correct position on the ceiling where the luminaire would be installed. Next, drill the holes and hit the plastic expansion tube in the holes, fix the clips on the ceiling with expansion screws.

instruction

Step 3. Make the connection to the current according to the following instructions and turn it on.

Matters need attention 1. Before use, should carefully read the instructions , to avoid accidents and damage.
2. Please wear gloves to avoid injury before installation work.
3. Lighting installation, and wiring work must be carried out in the absence of power.
4. Power line joints must do insulation , waterproofing treatment.
5. Do not look directly at the light emitting LED lighting in close distance, ensure not hurt the eyes.

ModelPcs/CtnLong (mm)Width (mm)Height (mm)Gross Weigth (kg/ctn)
EXLL100W457539527515,1
EXLL150W482039527519,5
EXLL200W4107039527524
    $name$
    $name$
Product Builder (start building your product)
model
EXLL
power
100W
150W
200W
color CCT
AMB2
2200K
AMB
1700K
CW
6000K
NW
4000K
PW
5000K
WW
3000K
dimensions
503
503*125*89mm
747
747*125*89mm
991
991*125*89mm
lens
LIT11
Asymmetric rectangular distribution
LIT12
Medium vertical asymmetric distribution
LIT6
Symmetric distribution of 70º
LIT9
Symmetric distribution of 45º
control
1-10V
Dimming 1-10V
DALI
Digital Addresable Lighting Interface
NC
No control
PWM
Pulse Width Modulation
Protection class
I
Type I
II
Type II
Optionals
EXPEC001
Photoelectric control sensor
INTEGRATED
PW·10KD05KWV
External surge protection device 10kv
INTEGRATED
PW·20K
External surge protection device  20kV
INTEGRATED
Accessories
ReferenceNameDescription
EXADP3IP65Ocupancy Sensor 3 step dimming Ip65
EXMCMounting Clips
Product Parameters
ReferenceSystem PowerSystem Efficacy (Lm/W)Luminous Flux (Lm)Lumen maintenance @ Ta=25ºCDimensionsWeight (Kg)
@ 3000K @ 4000K @ 5000K @ 6000K
EXLL100W140lm/W ±10%13328141821472815274L80 F10 60.000h503*125*89mm3
EXLL150W140lm/W ±10%19992212732209222911L80 F10 60.000h747*125*89mm3,8
EXLL200W140lm/W ±10%26656283642945630548L80 F10 60.000h991*125*89mm4,6

C/ Ventalomar 1, 45007,
Toledo Spain
(+34) 925 115 522
info@enarlux.es

Enarlux Colombia S.A.S. Mall Toma Real, Carrera 9 #10 07, Local 24,
Neiva city - Huila, Colombia
(+57) 322 760 11 25
info@enarlux.co

9th Floor, Amtel Building,148 Des Voeux Road Central –
Republic of China - Hong Kong
Tel : (852) 9547 1251
(GMT +08:00 hours)

ENARLUX born under the idea of being a world leader in the design and manufacture of LED lighting products with high quality and reliability.

ENARLUX performs strict auditing processes and manufacturing control, as well as a comprehensive selection of components that ensure a finished product of high durability and high performance.